Search results for "Polycarboxylate Cement"
showing 10 items of 10 documents
A prospective clinical study of polycarboxylate cement in periapical surgery
2011
Objective: To evaluate the clinical efficacy of polycarboxylate cement as retrograde filling material. Design: A prospective clinical study was made of 25 patients subjected to periapical surgery with ultrasound and magnifying loupes, in which polycarboxylate cement was used as retrograde filling material. Measurements were made of the area and diameter of the lesions pre- and postoperatively, and 6 and 12 months after the operation. The apical resection and retrograde filling areas were also measured, and the prognosis following surgery was recorded. Results: A total of 23 patients with 31 apicoectomized teeth were studied (2 patients being lost to follow-up). The mean area of the periapic…
In vitro comparison of the retention capacity of new aesthetic brackets.
1999
Tensile bond strength and bond failure location were evaluated in vitro for two types of aesthetic brackets (non-silanated ceramic, polycarbonate) and one stainless steel bracket, using bovine teeth as the substrate and diacrylate resin as the adhesive. The results show that metallic bracket had the highest bond strength (13.21 N) followed by the new plastic bracket (12.01 N), which does not require the use of a primer. The non-silanated ceramic bracket produced the lowest bond strength (8.88 N). Bond failures occurred mainly between bracket and cement, although a small percentage occurred between the enamel-cement interface with the metal and plastic brackets and within the cement for the …
Retentive strengths of cast gold crowns using glass ionomer, compomer, or resin cement
1998
The retention forces of a newly developed compomer cement (Dyract Cem), a glass ionomer cement (Ketac Cem Aplicap), and a resin cement (F21) were examined.Cemented cast gold crowns were removed along the path of insertion with a Zwick universal testing device. The impact of both a cured and a noncured additional bonding layer that were applied to the inner surface of the crowns was examined across the Dyract Cem group.The mean adhesive strength was measured at 2.36 +/- 0.69 N/mm2 in the Ketac Cem group, at 0.60 +/- 0.28 N/mm2 in the F21 group, and at 1.85 +/- 0.94 N/mm2 in the Dyract Cem group, respectively. The application of an additional bonding layer to the inner surface of the crowns d…
Stable, hydroxyl functional polycarbonates with glycerol side chains synthesized from CO(2) and isopropylidene(glyceryl glycidyl ether).
2012
A series of functional polycarbonates, poly((isopropylidene glyceryl glycidyl ether)-co-(glycidyl methyl ether) carbonate) (P((IGG-co-GME) C)) random copolymers with different fractions of 1,2-isopropylidene glyceryl glycidyl ether (IGG) units, is synthesized. After acidic hydrolysis of the acetal protecting groups, a new type of functional polycarbonate prepared directly from CO(2) and glycerol is obtained, namely poly((glyceryl glycerol)-co-(glycidyl methyl ether) carbonate) (P((GG-co-GME) C)). All hydroxyl functional samples exhibit monomodal molecular weight distributions with PDIs between 2.5 and 3.3 and M(n) between 12 000 and 25 000 g mol(-1) . Thermal properties reflect the amorphou…
Aliphatic polycarbonates based on carbon dioxide, furfuryl glycidyl ether, and glycidyl methyl ether: reversible functionalization and cross-linking.
2014
Well-defined poly((furfuryl glycidyl ether)-co-(glycidyl methyl ether) carbonate) (P((FGE-co-GME)C)) copolymers with varying furfuryl glycidyl ether (FGE) content in the range of 26% to 100% are prepared directly from CO2 and the respective epoxides in a solvent-free synthesis. All materials are characterized by size-exclusion chromatography (SEC), (1)H NMR spectroscopy, and differential scanning calorimetry (DSC). The furfuryl-functional samples exhibit monomodal molecular weight distributions with Mw/Mn in the range of 1.16 to 1.43 and molecular weights (Mn) between 2300 and 4300 g mol(-1). Thermal properties reflect the amorphous structure of the polymers. Both post-functionalization and…
Controlled Synthesis of Multi-Arm Star Polyether-Polycarbonate Polyols Based on Propylene Oxide and CO2
2013
Multi-arm star copolymers based on a hyperbranched poly(propylene oxide) polyether-polyol (hbPPO) as a core and poly(propylene carbonate) (PPC) arms are synthesized in two steps from propylene oxide (PO), a small amount of glycidol and CO2 . The PPC arms are prepared via carbon dioxide (CO2 )/PO copolymerization, using hbPPO as a multifunctional macroinitiator and the (R,R)-(salcy)CoOBzF5 catalyst. Star copolymers with 14 and 28 PPC arms, respectively, and controlled molecular weights in the range of 2700-8800 g mol(-1) are prepared (Mw /Mn = 1.23-1.61). Thermal analysis reveals lowered glass transition temperatures in the range of -8 to 10 °C for the PPC star polymers compared with linear …
Reactive Surface Coatings Based on Polysilsesquioxanes: Controlled Functionalization for Specific Protein Immobilization
2009
The key designing in reliable biosensors is the preparation of thin films in which biomolecular functions may be immobilized and addressed in a controlled and reproducible manner. This requires the controlled preparation of specific binding sites on planar surfaces. Poly(methylsilsesquioxane)-poly(pentafluorophenyl acrylates) (PMSSQ-PFPA) are promising materials to produce stable and adherent thin reactive coatings on various substrates. Those reactive surface coatings could be applied onto various materials, for example, gold, polycarbonate (PC), poly(tetrafluoroethylene) (PTFE), and glass. By dipping those substrates in a solution of a desired amine, specific binding sites for protein ads…
Effect of environmental conditions on the durability of polycarbonate for the protection of cultural heritage sites.
2019
Polycarbonate is a good material for covering and protecting cultural heritage sites because of its durability, mechanical properties, and transparency. However, polycarbonate degrades under environmental weathering with a significant decrease of physical and mechanical properties and loss of transparency. In this work, the contemporary presence of ultraviolet irradiation and different temperature and moisture conditions have been taken into account to study the environmental degradation of this polymer with regard to its mechanical and optical properties. The photo-oxidation reactions cause a decrease in the molecular weight and the formation of many oxygenated species. The hydrolytic sci…
Effect of thermocycling with or without 1 year of water storage on retentive strengths of luting cements for zirconia crowns
2015
Abstract Statement of problem Bond stability between zirconia crowns and luting cement and between cement and dentin is a main concern; however, only limited evidence is available as to its longevity. Purpose The purpose of this in vitro study was to measure the retentive strengths of 7 self-adhesive cements (RelyX Unicem Aplicap, RelyX Unicem Clicker, RelyX Unicem 2 Automix, iCEM, Maxcem Elite, Bifix SE, SpeedCem), 2 adhesive cements with self-etch primers (Panavia 21, SEcure), 1 glass ionomer cement (Ketac Cem), 1 resin-modified glass ionomer cement (Meron Plus), and 1 zinc phosphate cement for luting zirconia crowns (LAVA) to extracted teeth after thermocycling with or without 1 year of …
Propargyl-functional aliphatic polycarbonate obtained from carbon dioxide and glycidyl propargyl ether.
2013
The synthesis of propargyl-functional poly(carbonate)s with different content of glycidyl propargyl ether (GPE) units is achieved via the copolymerization of propargyl glycidyl ether and carbon dioxide. A new type of functional poly(carbonate) synthesized directly from CO(2) and the glycidyl ether is obtained. The resulting polymers show moderate polydispersities in the range of 1.6-2.5 and molecular weights in the range of 7000-10 500 g mol(-1). The synthesized copolymers with varying number of alkyne functionalities and benzyl azide are used for the copper-catalyzed Huisgen-1,3-dipolar addition. Moreover, the presence of vicinal alkyne groups opens a general pathway to produce functional …